Details
This pack holds 3 loose fan male pins, the crimp-on terminals for the male fan connectors: 3-pin fan (MOD-0109) and 4-pin PWM (MOD-0111). The male fan terminal is used for custom fan extensions as well as other applications, at the end where the plug of the fan or pump goes in.
Properties
- Type
- Crimp-on terminal, male
- Pin family
- Fan
- Fits
- Male 3-pin and 4-pin fan connectors
- Pieces in the pack
- 3
Which connectors they fit
These fan male pins go into the male fan connectors: 3-pin fan (MOD-0109) and 4-pin PWM (MOD-0111). ModMyMods sells each housing on its own, so you can pick exactly the connectors your cables need.
Crimp-on terminals
Each pin is crimped onto the end of a wire and then pushed into the back of the connector housing. Crimp the wings at the back of the pin around the wire and its insulation.
Small packs
The pins come in packs of 3, so you can quickly and easily order just the number you need for a repair or a few cables without overspending.
Technical data
| Type | Crimp-on terminal, male |
| Pin family | Fan |
| Fits | Male 3-pin and 4-pin fan connectors |
| Pieces in the pack | 3 |
Notes
- You need one pin for every wire; order a spare or two in case a crimp needs to be redone.
- To take a pin back out of the housing, use a pin extractor such as the ModMyMods Fan / JST / SL Pin Extractor Tool (MOD-0319).
In the box
- 3x Fan Male Pin
