Details
This pack holds 5 loose Dupont female pins, the crimp-on terminals for the Dupont connectors: 1-pin (MOD-0107) and 2-pin (MOD-0108). The Molex Dupont crimp pin is the one commonly found on front panel and USB header wires. With these pins you can make your own header wires in the length you need.
Properties
- Type
- Crimp-on terminal, female
- Pin family
- Dupont
- Fits
- 1-pin and 2-pin Dupont connectors
- Pieces in the pack
- 5
Which connectors they fit
These Dupont female pins go into the Dupont connectors: 1-pin (MOD-0107) and 2-pin (MOD-0108). ModMyMods sells each housing on its own, so you can pick exactly the connectors your cables need.
Crimp-on terminals
Each pin is crimped onto the end of a wire and then pushed into the back of the connector housing. Crimp the wings at the back of the pin around the wire and its insulation.
Small packs
The pins come in packs of 5, so you can quickly and easily order just the number you need for a repair or a few cables without overspending.
Technical data
| Type | Crimp-on terminal, female |
| Pin family | Dupont |
| Fits | 1-pin and 2-pin Dupont connectors |
| Pieces in the pack | 5 |
Notes
- You need one pin for every wire; order a spare or two in case a crimp needs to be redone.
- For crimping the small Dupont pins, the ModMyMods Professional Molex Crimping Tool for 2.0, 2.5, 2.54 Pitch PH Dupont (SN-02BM) is made for this pin size.
In the box
- 5x Dupont Female Pin
